BENNETT TRIM TABS

BENNETT VP1140 Hydraulic Power Unit Filler Plug 6BT-50099-18-00 The VP1140 is a replacement filler plug that can be used with any Bennett Marine manufactured hydraulic power unit. This is small...

BENNETT VP1139 Fluid Reservoir for Hydraulic Power Unit 6BT-50099-17-00 Approximately 22 ounces of any type automatic transmission fluid (ATF) is required to fill the reservoir to proper level for...

BENNETT VP1138 Pump and Motor Lexan Cover 6BT-50086-63-00 Lexan cover replacement for use with Bennett hydraulic power unit. Translucent cover allows fluid check at a glance. #6 in the diagram.

BENNETT VP1135R Solenoid Valve 12 Volt Red Wire (Port) 6BT-50086-74-00 Solenoid valves direct the flow of fluid to the actuators. The solenoid valves lock tightly to secure the tabs in place. Color:...

BENNETT VP1135G24V Solenoid Valve 24 Volt Green Wire (Stbd.) 6BT-50079-56-00 Replacement Solenoid Valve for use with Bennett's Hydraulic Power Unit. Solenoid valves direct the flow of fluid to the...

BENNETT T1127 Compression Nut with Ferrule Hydraulic Tubing Fitting 6BT-50063-82-00 Connects hydraulic tubing to hydraulic pump. #13 in diagram. Nut with ferrule Compression...

BENNETT T1126 Brass Line Tee Fitting for Dual Actuator Trim Tabs 6BT-50063-81-00 Splits hydraulic line to feed two actuators. Material: Brass Bennett "T" Fitting - for Dual Actuator Trim Tabs

BENNETT T112520 Hydraulic Tubing 20 FT Coil 6BT-50063-64-00 Is your Trim Tab System not functioning properly? The problem may be kinked or damaged hydraulic tubing. Replace it with Bennett Marine's...

BENNETT SSADAC10D-316 SSA Premier Hydraulic Actuator 6BT-50109-60-00Stainless steel actuators Dual acting (with no external hydraulic lines) Precision machined Single or dual cylinder No dissimilar...

BENNETT WH100022 Standard 22 FT Wire Harness 6BT-50080-16-00 Wires are color coded for easy connection. One end simply plugs into the Hydraulic Power Unit harness plug, and the other end is neatly...

BENNETT VP1161 Hydraulic Pump Unit Valve Plunger 6BT-50079-80-00 Replacement valve plunger for all Bennett Hydraulic Power Unit Motors. This product is easy to use and install. Refer to manufacturer...

BENNETT Marine RM12 Relay Module 12 Volt 6BT-50052-97-00Bennett Marine RM12 Relay Module 12 Volt. A Relay Module reduces voltage drop in Trim Tab Systems with longer wire runs. With the older trim...