Blog

As the warm, carefree days of summer come to an end, it’s time to think about the off-season and how to keep your watercraft in top shape for years to come. If you own a jet ski or outboard motor, proper winterization is crucial. Skipping this step could lead to costly repairs, decreased performance, or, in worst cases, permanent damage to your valuable equipment. Here’s why winterizing is so important and how you can ensure your jet ski or outboard motor is prepared to hibernate safely until the next season.

Find PWCParts Outboard and PWC Winterization kits here...

PWCParts Winterization Kits to Winterize your outboard motors and jet skis

Why Winterization is Essential

1. Preventing Freezing Damage Water trapped inside your jet ski or outboard motor can freeze during cold months. When water freezes, it expands, which can cause significant damage to internal engine components, cooling systems, and hoses. Properly winterizing your watercraft ensures that all water is flushed out and replaced with antifreeze where necessary, preventing cracks and bursts in the system.
2. Corrosion Control Water and humidity left in your jet ski or outboard motor can lead to rust and corrosion over time. By taking steps to winterize, you help protect metal parts from the harsh effects of oxidation. Applying a protective lubricant or fogging oil to the engine’s internal components creates a barrier against moisture and air, reducing the risk of rust.
3. Battery Preservation The battery in your jet ski or outboard motor needs attention as well. Leaving the battery connected and unused over the winter months can lead to it losing its charge or even becoming damaged. Removing the battery and storing it in a cool, dry place helps maintain its lifespan and ensures it’s ready for action come spring.
4. Fuel System Protection Stagnant fuel can cause significant issues over time. Ethanol in the fuel can attract moisture, which leads to phase separation. This process leaves water in the fuel, which can corrode fuel system components and affect engine performance. Adding a fuel stabilizer to the fuel tank and running the engine for a few minutes distributes the stabilizer throughout the system, preventing the fuel from breaking down and gumming up the carburetor or fuel injectors.

Step-by-Step Guide to Winterizing Your Jet Ski and Outboard Motor

1. Flush the Cooling System Use fresh water to flush the cooling system to remove any salt, sand, or debris that may be present. This is especially important if you operate your jet ski or outboard motor in saltwater. For outboard motors, attach a set of muffs and run water through the system while the engine is running in neutral.
2. Drain Water and Add Antifreeze Ensure all water is completely drained from the jet ski or outboard motor. For added protection, fill the cooling system with a marine-grade antifreeze. This step prevents any remaining water from freezing and causing damage.
3. Lubricate Moving Parts Use fogging oil or lubricant spray on the engine’s cylinders and moving parts to prevent corrosion. For outboard motors, disconnect the fuel line and spray fogging oil directly into the carburetor or air intake while the engine runs until it stalls. For jet skis, follow the manufacturer’s instructions for oiling the cylinders.
4. Stabilize the Fuel Add a fuel stabilizer to the tank and run the engine for 5–10 minutes to ensure it circulates throughout the fuel system. This keeps the fuel from deteriorating and prevents issues related to varnish or gum buildup.
5. Battery Care Disconnect the battery and store it in a dry, cool place. Charging the battery every few months ensures it stays healthy and ready for use in the next season. Consider using a battery tender for maintenance charging.
6. Protect the Exterior Clean the hull and apply a high-quality wax to prevent dirt buildup and oxidation during storage. This step will make spring cleaning easier and keep your watercraft looking its best.

Benefits of Proper Winterization

Taking the time to winterize your jet ski and outboard motor offers several advantages:

• Cost Savings: Prevents expensive repairs by addressing potential issues before they escalate.
• Increased Longevity: Ensures the longevity of your equipment by reducing wear and tear.
• Peak Performance: Keeps your watercraft running smoothly, so when it’s time to hit the water again, you won’t be met with unexpected surprises.
• Peace of Mind: Knowing your equipment is safe and protected during the off-season can give you peace of mind as you plan your next adventure.

Final Thoughts

Winterizing your jet ski and outboard motor might take a little extra effort, but it’s well worth it. Ensuring your watercraft is properly prepared for winter not only helps protect your investment but also allows you to enjoy worry-free riding when warm weather returns. By following these simple steps and maintaining a regular winterization routine, you can extend the life of your jet ski or outboard motor and make the most out of every boating season.

So, as the temperatures drop, don’t wait—take the time to winterize your equipment. Your future self will thank you when spring rolls around and your watercraft is ready for smooth, trouble-free operation.